Our production


Underlayment under a laminate and a floorboard VIP Floor Simple installation

3 mm


The best option for using a substrate under a laminate or a parquet board is an extruded foam polystyrene TenziPlexUA, a substrate under the laminate TensiPlexUA from this material has all the necessary peculiarities for stacking.

Underlayment under a laminate and a floorboard VIP Floor Simple installation

4 mm


The best option for using a substrate under a laminate or a parquet board is an extruded foam polystyrene TenziPlexUA, a substrate under the laminate TensiPlexUA from this material has all the necessary peculiarities for stacking.

Underlayment under a laminate and a floorboard VIP Floor Simple installation

5 mm


The best option for using a substrate under a laminate or a parquet board is an extruded foam polystyrene TenziPlexUA, a substrate under the laminate TensiPlexUA from this material has all the necessary peculiarities for stacking.


The substrate under the floorboard and laminate flooring with heating system

2 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate under the floorboard and laminate flooring with heating system

3 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate under the floorboard and laminate flooring with heating system

4 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate under the floorboard and laminate flooring with heating system

5 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate for laminate and parquet board

2 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate for laminate and parquet board

3 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate for laminate and parquet board

4 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.

The substrate for laminate and parquet board

5 mm


The best option for the substrate under the floorboard or laminate is extruded polystyrene TenziPlexUA, under the laminate substrate TenziPleksUA of this material has all the necessary features for installation.



Advantages of extruded polystyrene foam



The relatively low price. Although such a substrate is several times greater than a simple PE foam backing, but still cheaper than other types of substrates.
The ease and speed of installation. The substrate is sufficient to expand. The substrate sheet is cut simply wallpapering ordinary knife.
absorbs vibration operating electrical equipment;
It has a low specific weight and, therefore, is lighter;
minimal water absorption and low thermal conductivity are more closed cell structure. As a consequence - on the basis of stacking is performed without hygroscopic film.
Extrusion provides a material that is substantially different at the level of the chemical structure of foamed polystyrene (Styrofoam), and is a homogeneous solid with strong intermolecular bonds - a set of a set of isolated cells of diameter 0.1-0.2 mm, filled with gas molecules.

The homogeneous structure consisting of small sealed cells, provides the material with sufficient strength and rigidity, low thermal conductivity. Cells of the heater is completely closed, there are a capillary as the foam or foam rubber.

Cells of the heater is completely closed, there are a capillary as the foam or foam rubber.
Exclusion deformation, even after prolonged operation,
the ability to withstand significant loads,
low water absorption coefficient,
high thermal insulation performance (due to the porous structure of the material),
the ability of the natural air exchange, due to which it becomes impossible to condensation under laminate, very sensitive to moisture,
the accuracy of geometric dimensions, increases installation speed,
no need to use specialized fasteners or adhesives,
resistance to fire.



Our reviews



Keep in mind that before the installation of the substrate, it is necessary to unpack and keep them indoors all plate material for some time, in order to be accepted and dealt with the time the correct form. Extruded polystyrene foam can be installed on any kind of base, thus will not need to use fasteners or glue.




Get a call

Leave your contact and we will call you back!











Created by 3-BIT




Get a call

Leave your contact and we will call you back!










UP